Our Teak is perfect for a travelling tap dance floor. This floor type is best used indoor. For outdoor use, any of our laminates would work beautifully.

Our Vinyl Floors and Composite Laminates can be set up on grass, carpet or other surfaces. We do recommend a tent over Vinyl if used outdoors. Laminates do not require a tent and are our most scratch resistant.

a. For regular cleaning after use, you can use any floor cleaner with a micro fiber cloth. You do not want to use a degreaser as it will remove the wax.

b. For heavier marks that will not come off with the cleaner and cloth, you can use a buffing machine and black scrubbing pad.

c. For edging you can use a spray bottle with paint thinner and steel wool.

Once the floor sections are on site, 2 people can install a 20′ x 20′ floor using 4′ x 4′ sections in about 40 minutes. Simply follow the guide. You can connect or disconnect the floor sections from each other by tightening or loosening the fastening screws. The screws are designed to be left in each section when dis-assembling the floor. Just loosen the screws with a couple of twists. ****Please make sure you do not loosen the screw so that it protrudes above the surface of the floor section. You do not want to scratch the floor next to it when storing your sections.

Our Indoor/ Outdoor Floors are weather resistant, meaning you can use them on wet grass, cement or other surfaces that are not submerged in water. The bottom of the floor are made with a full grain water resistant plywood base. If it begins to rain, the floor does need to be picked up right away and the sections need to be dried and stacked on a flat surface, face to face and bottom to bottom, until dry. If the grass is very wet, a tarp under the sections will help to protect the floor sections. Drink spills on top of the floors will not harm the floor. Caution: Floors are slippery when wet. Please keep dry to avoid falls and accidents.

See Instruction Booklet for full information. But we do offer a 3 year warranty to the original purchaser from date of purchase for manufacturing defects. There is no money back guarantee.

We have rental companies that have had our floor sections in their inventory for 10 to 15 years and more. They will last a long time of you take proper care of the floor sections.

Floor sections are best stored on a flat surface with the sections stacked face to face and back to back.

For the vinyl sections and the laminate sections we do recommend waxing to help protect them. Use the floor maintainer and a microfiber cloth to remove surface marks. For deeper scratches, you may have to replace a tile of the vinyl in the section. Refer to Instruction Booklet for directions. For deeper scratches on the laminate flooring, you can use a paint pen with a matching color that may be purchased at Home Depot. The Windsor Oak Finger Parquet does not require wax. For deep scratches, use a Dura Seal stain in a Cinnamon color. This can be purchased at Home Depot.

We can get some custom colors in the laminates. For custom configurations, let us know the dimensions so we can recommend the best way to fit our sections to your needs. We can do custom sizes when needed.

The standard edge has a 45% slope and can be used indoors or outdoors. *** Best for uneven surfaces.

The wide edge has an 11% slope and is best used indoors. Hotels, country clubs etc. prefer this style as it helps them meet the Americans With Disabilities Act. A wheel chair can get up on the floor with this style.

We do have small sample pieces of the tops of the floor sections we can send for our floor sections for customers to see the color.

You can see them on our website, at Trade Shows and you can come by our shop in Camarillo, CA

We ship floors strapped to a pallet by truck. The edging is strapped to the pallet on top of the floor sections. If you are ordering one panel or a few borders, we will ship them U.P.S.

All sections are made with a full grain water resistant plywood base. They have a metal extrusion around all edges of each floor section that is the connecting device. Sections and edging connect with a tongue-in-groove with a set screw design.

The only size in our patented extrusion design Round floor is our 24′ diameter round. The round floor is only available in our composite laminate style. You can split the floor in half and add rows of 4′ x 4′ sections to make an ever increasing size oval floor. You can also split the round floor into quarters like a pizza pie and add a row and a column of 4′ x 4′ sections in the middle to make a larger rounded floor. Curved Sections and Curved Edges come with the conversion kit.

We make our sections in 3′ x 3′, 3′ x 4′ or 4′ x 4′ sizes. We can do most custom sizes upon request.

Our floor sections are not compatible with other floor manufacturers’ floors and ARE NOT WARRANTEED if you try to connect them to any other manufacturer’s floor sections.

No refunds or returns are accepted. Exchanges or repairs, at our discretion, are done for manufacturing defects with notification prior to our 3 year warranty we offer. See the Instruction Booklet for complete details.

We do not rent. We manufacture and sell. We can recommend a rental company for rentals.

Yes purchase orders are accepted. However, orders from customers need to be prepaid prior to shipping, unless a credit application has been submitted and approved for Net 30 terms, prior to shipping.

A credit application needs to be filled out and processed for approval.

Our floors are made with the full grain plywood base. They are approx. 7/8″ thick. They are designed so that they can be used on uneven surfaces as they essentially have the sub-floor built into it for the strength for the uneven surface.

They can be used on thick carpeting. However, thick carpet and padding may result in the floor traveling a bit during your event.

“Will Call” is available.

Sales tax is only applicable if the floor is shipped anywhere in the state of California, unless you have a resale certificate.

We offer a small or deluxe cart available to move and store your dance floor. The small cart holds up to 20 sections only.

The deluxe cart holds up to 25 sections and has a place for the edging.

Traditionally, only about half of your guests will be on the dance floor at any one time. A 4′ x 4′ section, depending on the style of dancing can hold maybe 2 or 3 people. For a 200 guest event, you might have maybe 100 to 120 people dancing. To accommodate 100 to 120 people you could get a 28′ x 28′ (49 sections) or a 32′ x 32′ (64 sections) for 2 people per section.

As long as the floor has been properly installed there should not be any problems with people dancing barefoot on the floor.